Note the details of the bathroom renovation

Toilet and bathroom renovation, which reflects its comfort, warmth and security as a focus of the decoration. Bathroom decoration in the home decoration is very much involved in the details, if handled properly, not only directly affect the future quality of home life, it will affect the mood. Therefore, in the bathroom renovation should pay attention to the following points:

Roof design. Heavy water vapor between the bathroom, so choose those with a waterproof, corrosion, rust-proof features of the material of the roof.

Ground points. In the floor tile the bathroom, be sure to do water; after the tile laying, to ensure that there is a drain tile slope (generally about 1% is appropriate), the slope towards the floor drain; floor tiles in the end, after laying off the water to do experiment to ensure that at least 24 hours; laying tiles and wall pass to the attention of joints, alignment, to ensure the overall sense of the whole bathroom in order to avoid chaos in the visual impression produced patterns.

Consideration of the wall. Bathroom wall tiles should pay attention to moisture, water, and the time to ensure smooth tiling and communication with the floor tile joints, alignment, to ensure that the overall sense of the wall and the ground; water pipes in case of exports, tile smaller incision, appropriate, convenient water supply and control incisions on the cover flange cover, making the appearance of a perfect and natural.

Doors and windows to note. Better to have bathroom windows to facilitate ventilation; If you do not impede the ventilation windows, where particular attention to the details of the door. To prevent water from overflowing bathroom, bathroom door inside the boundary to slightly higher; the bathroom door and the ground was a large gap to stay a little, in order to facilitate the return air vent; If the sliding door, but also in the sliding door between the bathroom tiles with a layer of water to prevent water seepage to do.

Laying emphasis on the circuit. Bathroom wire solder joints must be linked to, and to have waterproof tape and insulating tape wrap to ensure safety; body must put on flame-retardant wire and tube; all switches and outlets must have a moisture-proof boxes, and the location also depend on electrical appliances depending on size and location to ensure ease of use and reasonable in order to reduce undue trouble.

Prevent water transformation. Bathroom water supply and drainage lines is best not to do too much change, if you want changes, according to the specific circumstances, such as washing machines of different models, up and down the location of water will vary, so water does not move the best.

The installation of sanitary ware good. Best decoration in mind before launching a good pitch, selected by size bath, bath room, toilet, wash basin and other fittings, in order to avoid the wrong size in the decoration; Toilet installation first sealed with a potty mud, plastic or glass and then expansion screws fixed, so that when the toilet clogged to leave room for easy repair.

Stressed ventilation. Bathroom exhaust fans must be, and the exhaust fan must be a retrograde safety gates to prevent backflow of air pollution, and other non-gas reflux.

Green dotted reserved. To add to the dash of anger, so the bathroom should not become the forgotten corners of the green. In this way, the decoration can choose some shade-tolerant, hi humidity, potted plants placed in the appropriate restroom tide, so that added to the bathroom kind of angry.