Kitchen cabinet remodeling can be approached in many different ways. It depends on how much money you are ready to spend and what kind of a result you desire. The cost can be kept under control when you just give a new look to an existing set of cabinet; but if money is not a factor then you can always go for replacing the whole stuff. In any case the other parts of the kitchen should also be looked upon while handling the cabinets.
The cabinets can be given a new look by sanding them and repainting them. In order to make the kitchen remodeling project easier and consistent, the drawers and the other hardware can be removed before sanding the cabinets. Sanding should be done very thoroughly almost to the level of bare wood. The stains and wax drops should be removed before that by using solvents. This makes it easier to do the sanding and reach the bottom layer.
During this process the doors should be cleaned totally and sanded to the same level as the cabinets to give a very uniform look. After sanding the wood clean and smooth and free from dust, it can be repainted or refinished with wood stain. All the cabinets, drawers and doors should be treated similarly so that the whole look of the kitchen has uniformity in its remodeled look.
Sliding Glass Doors Create Display Space
There are certain instances when a cabinet in a kitchen has an L-shape. In that case the door can be replaced with a sliding shutter made of glass. It imparts a se-through effect and it also allows the cupboard to be used as a display rack. This technique is one of the many ways of cabinet remodeling in a kitchen by which the room is made to look bigger than it actually is.
When working on the kitchen cabinet remaking project the countertop sometimes has to be removed in order to reach to the upper edges of the cabinets in the bottom. In this case the chance of an unpleasant streak to pop up from the juncture of the countertop and the bottom cabinets can be avoided. This will also help to clean up the dust, crusts and crumbs' accumulation in the joints.
Sometimes so much of renovations have to be done on the cabinets fitted to the wall, that, they need to be removed from the wall first. Then the cabinets can be placed on the floor or the garage and the work can be done then on them. Although it sounds to be inconvenient but as the work progresses owner find it easier to remove it and work than continue with the renovation project with the cabinets tightly fitted to the wall.
By:Cliff Eppalton
| 