Wooden flooring gives a classic and rich look to the house. You can throw away your old carpets and replace it with wooden flooring to enhance the antique appearance of your whole house or just parts of it. When you are determined to change or install your new flooring, you will have to start thinking of how to lay wood flooring. Of course, it is essential to know how to lay wood flooring to decide all the other factors like budgeting, the final look, whether you need any professional to install or to complete it by yourself.
This article is meant for the people who want to stand on their own two feet and do it yourself. Before starting the work of installing the wood flooring, you should know exactly how to lay wood flooring, please read on.
During the installation of parquet or plank or strip flooring, to start with, clear all the existing flooring, whether it is wooden, tile or vinyl. Access a subfloor with plywood to make a basic flooring to support the building's beam. If concrete is found in the basements, install 6 millimeters of polyethylene plastic vapor block trailed by plywood base of about half inch width. Usually, concrete is found in basement, rather than in the first and other upper floors.
When the plywood base is ready, check for the holes or scratches and fill them in with the help of plastic wood. Too many damages may cause disturbance to the installation. If you find one, you can replace those pieces. All these should be completed prior to the flooring work. Clean up the mess totally before installation. Measure the area that needs flooring.
Existing flooring is cleared, and so we move on to how to lay wood flooring. Strip or plank flooring are placed by using nails, but you cannot apply the same procedure in the parquet flooring, as nails may damage the delicate strip wood and hence adhesive is used to fix. When your subfloor tends to be too thin, nails cannot hold with grip, and the below ceiling may start to show marks. In that case, you need to add another subfloor or take up parquet or laminate flooring for your home.
Make use of exact tools for installing the wood flooring. If you are not aware of how to lay wood flooring with the right tools, you can get help from the professionals who will ask you to have chalk line, nails, pneumatic nailer, hammer and waste cloths. Start your work from the doorways to save time.
Ensure to pick out the easiest way of installing, as it would cost a lot to recover your mistakes. Use the straight line fittings to make it easier and make use of the chalk line to make it straight. Mark all the areas with your chalk to have a professional look. When you are finished with, allow the flooring to set for two days. Until then, avoid over walking on the floor. But you have to walk on it, if you have to do small repair or mending works to make the floor attractive.
| 