Hot To Do Vacuum Cleaner Repair By Yourself | It's unbelievably easy to do some vacuum cleaner repair yourself if you understand the basic damage that might occur to your vacuum cleaner. Once you learn how to do it, your friend will definitely envy your knowledge or even pay you to repair their vacuum cleaners.
Understanding the main problem that cause the malfunctioning is the key to become a vacuum cleaner repair specialist. Always consider asking this three questions:-
1) What has causing it to malfunction?
2) How does it happen?
3) Is it easy to repair? (Very important. If it is not, send it to a real specialist)
Most of times, the component of the vacuum parts is the number one cause of a problem. Very much like car which has a timing belt, vacuum cleaners have its own belt as well. Once this is damage, there is no way of repairing it. You need to buy this at an electric store to replace it with new belt and the cost is affordable. So, how do you know exactly it is damage? You will have to flip the belt on its front until you are able to face the brush. Next, check the belt after you have unscrewed the small plate located on the brush. The belt might have been snapped or got stuck around the brush.
You have to clear all the dust, debris, dirt and hair that got stuck on the vacuum agitator brush if you want to do the repair work by yourself. In order to do this, cut the damage belt with a new belt and screw the plate back to its original position.
Some people prefer to use a bagged vacuum cleaner,. The only drawback is the bag need to be change regularly and swap it with a new one once it is full. Don't assume that the bag still has space left in it because once the bag is fully overloaded, the hose will be cloak by the dirt and you have to spend unnecessary cost to repair it where you can avoid this in the first place.
In times, the suction power of vacuum cleaner will slowly reduce due to frequent use. You might think it is due to bag overloaded but after you have changed it, the suction power is still weak. To make things right, check inside the hose. There might be something slightly bigger than the hose that block the circulation of the vacuum cleaner. Use a small stick or broom that can fit inside the hose and push it out.
If you have notice, there are only 3 things that cause the malfunctioning of a vacuum cleaner:-
1) Damage belt
2) Agitator brush problem
3) Blockage of the host
So there you have it, a straight forward problem with a simple method to do some vacuum cleaner repair works. If you really can not repair your vacuum cleaner, just buy a new one since the cost is not that high anyway.
|
|
