Bornemann鲍诺曼泵

价格：电询 品牌：鲍诺曼 海泰美信贸易（北京）有限公司 在线咨询

详情介绍更新时间：2017/9/29 14:52:10

约翰•和诺尔•鲍诺曼泵业有限公司是世界上*的双螺杆泵生产商，在单螺杆泵领域也非常有名。鲍诺曼泵能提供令人信服的优点：由于泵的部件运行时无接触，与介质接触的部件就可以使用不锈钢制造。泵可以输送腐蚀性、稀薄的以及高粘度的液体，同时对中性、碱性或酸性及介质也都可以安全输送。对于需要小心输送的非常稀薄的液体，使用鲍诺曼泵会很方便。

类: 泵类->螺杆泵
名称:　双螺杆泵　
特点:　可以抽送多相流介质　
适用介质:　高粘度介质、多相流介质　
品牌:　德国鲍诺曼　
应用领域:　油港、油库、原油输送、化工业、造船业　
详细说明:　流量可达：2000m3/h
压差：
　　SL_12bar
　　HC-16bar
　 W_ 50bar
　 HP_100bar
入口压力：0.8bar--100bar
粘度：0.5--200,000cst
转速：3600rpm
温度：400℃

类: 泵类->螺杆泵
名称:　鲍诺曼双螺杆泵　
特点:　适用于高粘度和多相混合的介质　
适用介质:　汽油、碳氢化合物、海水、沥青、矿物油、胶、糖浆、酸性物质、碱性物质　
品牌:　德国鲍诺曼 Bornemann　
应用领域:　石油开采、油库、石油化工/炼油厂、化学工业、食品加工、船用、油漆工业、制药工业、污水处理、发电厂、化妆品业等　
详细说明:　 鲍诺曼双螺杆泵式一种容积式泵，其螺杆转子结构非常适合大流量范围，高吸上高度和高压差。基于简单的设计原理，双螺杆泵运转时泵内部的部件互不接触。因此双螺杆泵可以干转和泵送几乎任何介质，无论粘度高低或润滑性好坏都有很好的适应性和使用寿命。鲍诺曼双螺杆泵结实、用途广，特别适合于输送多种不同介质的情况。当介质粘度为125cSt时，高泵效和性价比体现得*为明显。
由于鲍诺曼双螺杆泵的结构简单,转动部件和易损件少.鲍诺曼双螺杆泵可靠性高,应用范围广:
用于海上平台和原油管道输送工程的采集和增压泵
用于驳船和原洋油轮卸载粘性介质
用于炼油厂,油库和石化工厂的输送泵和流程泵
用于化工厂的低剪切输送泵
用于挤压机,搅拌罐和造粒机的聚合物和树脂的喂给泵
多相流体的抽送,输送含气量达100％的介质
Bornemann twin screw pumps are self-priming, double ended positive displacement pumps with external timing gears and bearings. Manufactured in over 80 sizes, their design provides complete axial balancing of the rotating elements and eliminates all metal-to-metal contact within the pump.

They can handle virtually any non-homogeneous fluid, regardless of viscosity, lubricity or abrasiveness
e. g. seawater, bitumen, molasses, lime, acid, caustic solution or hydrocarbon
While pumping there is no metal-to-metal contact within the pump housing. This allows good pumping performance even with non-lubricating and corrosive and contaminated fluids.
 

As the pump rotates, the intermeshing of the two screws along with the pump housing form chambers. These chambers fill with the pumped fluid and move it from the suction side of the pump to the higher pressure discharge side of the pump.
The pump is designed to allow for reverse flow by simply changing the shaft direction. The suction becomes the dis-charge and vice versa, all without any modifications to the pump.


Wide range of applications

Self-priming

Pumped capacity proportional to speed

Compact construction

Direct drive without speed-reducer possible

Change of pumping direction - simple

Pumping elements - simple to replace

Easy maintenance

For almost all media and fluids

High viscosities possible

Low pulsations

Low noise level

Dry running possible

Constant flow on varying pressures and volumes

Very good suction performance up to NPSH

1 - 1,5 m/3 - 5 feet

Engineered 2-piece shaft and screw construction

Bornemann progressive cavity pumps are compact, rugged and powerful. They are available in various power ratings and combinations of materials. They have proved their value world-wide in public and industrial waste water treatment and in waste disposal.

海泰美信贸易（北京）有限公司
主营业务：水泵
联 系 人 ：叶先生
联系方式：010-83265380 13810823489 → 联系我时请告知是在建材采购网看到的